Waygate Technologies Krautkramer USM 10, Operating Manual

Page: 154 / 242

5 Operation DAC
154 Rev. - (09/2021) Krautkrämer USM 100
– Position the gate A on the first DAC echo (see
page 86).
– In the Command bar tap on AutoXX (see page 66) to
automatically set the echo to the required screen
height.
– In the Command bar tap on Calibrate (see page 66)
to record the first DAC point.
– Position the gate A on the second DAC echo.
– In the Command bar tap on AutoXX to automatically
set the echo to the required screen height.
– In the Command bar tap on Calibrate to record the
second DAC point.
– Record further DAC points in the same way. You can
add individual DAC points at any time.
– If not yet done, then set the function DAC / TCG to
DAC in order to display the DAC curve.
– Set the function DAC / TCG to TGC (time-corrected
gain). The horizontal line of the time-corrected gain is
displayed in the A-scan and all echoes are displayed
at 80 % screen height of the first reference point.