Waygate Technologies Krautkramer USM 10, Operating Manual

Page: 132 / 242

5 Operation Gates
132 Rev. - (09/2021) Krautkrämer USM 100
Gate B Start Mode
The start of the gate B is normally positioned starting
from the initial pulse as in the case of gate A.
You can alternatively specify the start of the gate B in re-
lation to an event in gate A. This function is also referred
to as automatic gate tracking. If there is no event in the
gate A, the starting point of the gate B is identical with
the value of the function
Gate A Start (see page 127).
The width and the threshold of the gate B are not affect-
ed by the gate tracking.
The tracking of the optional gate C is identical with that
of the gate B. However, the gate C can additionally still
be coupled to events in the gate B.
IP
The gate B is normally positioned starting from the initial
pulse.
IF
The gate B is positioned starting from the interface
echo. The
IF option can only be set when IF gate mode
is selected.
Gate A
If you choose the setting Gate A , the gate B is after-
wards always shifted automatically when you shift the
starting point of the gate A.