Waygate Technologies Krautkramer USM 10, Operating Manual

Page: 140 / 242

5 Operation Evaluation
140 Rev. - (09/2021) Krautkrämer USM 100
DAC Point
This parameter is only visible when DAC , JISDAC or
CNDAC has been selected in Eval Mode .
Select the point number for the following DAC Distance
value.
DAC Distance
This parameter is only visible when DAC , JISDAC or
CNDAC has been selected in Eval Mode .
In this parameter you must enter the TOF value of the
DAC point selected with the parameter
DAC Point .
DAC / TCG
This parameter is only visible when DAC , JISDAC or
CNDAC has been selected in Eval Mode .
You can select the working mode DAC or TCG.
Offset Mode
You can set an offset mode for the evaluation lines.
Fixed
A fixed offset is set for all evaluation lines.
Custom
Different offset values can be set for the evaluation
lines.
Offset
Here you can set the fixed offset for all evaluation lines.
Offset 1
When Custom has been selected in Offset Mode , you
can define the different offsets for the evaluation lines
with the parameters
Offset 1 , Offset 2 , Offset 3 , and
Offset 4 .