Waygate Technologies Krautkramer USM 10, Operating Manual

Page: 104 / 242

5 Operation General settings
104 Rev. - (09/2021) Krautkrämer USM 100
License
You can import licenses, which will then unlock addition-
al functions for your instrument. For this you need a val-
id license file (extension .
mlp ).
For the complete license upgrade procedure see
page 198.
Remote Connection
The USM 100 supports Virtual Network Computing
(VNC).
The VNC client displays the screen contents of a remote
device on a local computer (client) and in return sends
keyboard and mouse movements of the local computer
to the remote device.
The settings in the Remote Connection section allow
you to configure the instrument for remote control via a
network.
For the complete remote connection setup procedure
see page 56.
Allow Remote Access
You can allow the remote access via the network either
for viewing the screen only (eye icon) or for full remote
control (eye/mouse icon) of the USM 100. If the X icon
is marked, the remote access is blocked.
Remote Command
This function is reserved for service tasks.
Updates
Software updates are available via InspectionWorks .
Please check for latest update before using the instru-
ment.
For the update procedure see page 196.
About
In the About section you will find information about the
instrument and the currently installed software.
This information is important, for example, in connection
with updates or when communicating with the customer
service.