84
Saving an Image or Video in an MDI Inspection
1
. To save an image in the selected inspection point, press the SAVE hard key.
Double pressing this key saves a screenshot of the display screen. During the
save process, some of the following are available:
Required Observations -
IIf required by the MDI being run, a drop-down
characterization list (6) appears before the save menu. You must select an
entry to continue.
2. Save -
Saves the image with the associated MDI data and filename. (not
all appear in every MDI).
2. Save with Flag -
Save Function Note: Save (or Save With Flag) only after all
Comments, Observations, or Audio Comments are entered as this added
information will then be associated with the saved image.
Note:
The system automatically names the image to correspond to the
location in the MDI file currently selected.
2. / 6. Observation -
A drop-down list of characterizations which may be
associated with this image. Multiple characterizations may be selected from
this drop-down menu. Select
Done
to complete the selected observation
comment process.
2. / 4. / 5. Comments -
Allows you to enter free-form comments along with
the image. When generating a report, these comments are associated with
the specific image.
Note:
Comments must be entered prior to saving the image.
2. Add Audio Comments -
Record audio comments along with the image.
3
– These menus allow the user to add Audio Comments to any image prior
to saving. Be sure to select Done to complete the audio-comment recording
process.
5
– Store Comments to Presets Entered comments can be added to a list of
Preset comments from which you can later select.
Note
: Images and Videos saved using MDI are located in the inspection folder
created at the beginning of the inspection. The image or video file has XML meta
data associated with it to ensure searching and sorting capabilities with data
management software.
