13
Unpacking and Putting Away the System (Large Case)
Caution: If you do not pack the system carefully, as described, damage might occur.
1
– Remove tray to access additional storage space.
2
– The insertion tube (shown in red for clarity) is held in the case’s internal storage reel, which is accessed through the orange funnel shown here.
Install the insertion tube before installing the probe-and-handset assembly and remove it after removing the probe-and-handset assembly. Be sure to
straighten any loops or twists in the insertion tube before feeding it into the funnel.
Caution: Before storing the insertion
tube, first remove the optical tip and
install the head guard to protect the tip
attachment mechanism. Keep the head
guard on whenever no optical tip is in
place.
3
– Storage locations for two batteries.
Battery must be removed prior to installing
the iQ in the case.
4
– Rigidizer
5
– Mounting bracket and post
6
– Mounting bracket post fits in this hole
7
– Power supply / Battery Charger installed
in this slot
8
– Extra Pod in case
9
– Extra VideoProbe in case
10
– Two cases holding OTA's and a cleaning
kit fit in these slots.
11
– Gripper may be used alone, or with
Rigidizer, to aid in orienting camera.
