manualshive.com logo in svg

Waygate Technologies Everest Mentor Visual iQ VideoProbe, Operating Manual

Share
Download
Waygate Technologies Everest Mentor Visual iQ VideoProbe Operating Manual Download Page 105

105

Appendix H. Creating a Personalized Logo File

A custom logo can be loaded into the display, where it will appear in the lower left corner (in place of the default Logo). Suitable logos must be 

saved as PNG file format and must be no larger than 140 by 140 pixels. It is advisable to use image files that are approximatley square. To replace the 

Waygate icon with a custom icon:

1

 – Tap the lower-left corner of the display (typically contains a Logo) at any time to open the Global Menu, select Setup and then open the System 

menu. You can now choose to Load a Logo. 

2

 – Select to Load a Logo. This File Navigation window will open. 

3

 – Navigate to find the desired logo file. 

4

 – Choose the logo file and select Done. The newly loaded logo file appears at the bottom left of the display screen, provided it is configured to do so 

by the 

Screen and Display Settings

. 

Note: See next page for instructions to incorporate a transparent logo.

Summary of Contents for Everest Mentor Visual iQ VideoProbe





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands