Publication Number 53719. Issue 3, April 2012
Page 40
SERVICE MANUAL FOR THE 13754 TGX150 INTERNAL RLAN TYPE A/B SC ETM
Figure 10. Contactless Reader Assembly
•
Removing the Type A/B-2 Antenna PCB
Refer to Figures 9b and 47, as appropriate, in the following operations:
1.
Remove the Contactless reader assembly as described in Removing the
Contactless Reader assembly, this gains you access to the antenna PCB
fixings. The antenna PCB is fixed to a mounting plate.
2.
Unplug the RF connector from SK1 and the 5-way molex connector from
P1 of the Antenna PCB.
3. To remove the antenna PCB undo and remove the M3 nuts, shakeproof
washers and fibre washers (items 21, 23 and 25 of Figure 47); the
Antenna PCB can now be removed completely. Re-fit the PCB by
reversing these instructions.
Repeater Display
Repeater Display
chassis plate
Repeater Display
chassis plate
fixings
Repeater Display
PCB
Repeater Display
PCB 14 way
connector
Contactless reader
case
Contactless
Smart card pad
Smart card status
indicators
(Green, yellow, red)
Contactless reader
case Mounting
pillars (6 off)
