Publication Number 53719. Issue 3, April 2012
SERVICE MANUAL FOR THE 13754 TGX150 INTERNAL RLAN TYPE A/B SC ETM
Page 49
7.4.9 Removing The Paper Roll Plinth
To remove the paper roll plinth, first remove the paper roll spigot as detailed in Para. 7.4.8.
With reference to Figure 13, locate and remove the two M3 PT screws that secure the plinth
to the top of the printer plate - the screws are on the underside of the printer plate.
When the screws have been removed, the plinth can be lifted clear. Note that the spigot
rotation ball bearing and spring may still be in position in the projection on the underside of
the plinth (see Figure 15). These should be retained for use when replacing the spigot - see
Paragraph 7.4.8.
LOCKING WHEEL
SPRING SHAFT
SECURING SCREW
PAPER GUIDE
SECURING SCREW
PAPER GUIDE
SECURING SCREW
AND NUT
TICKET BLADE
LOCKING PIECE
PRINTER ROLLER
SHAFT
PRINT HEAD
LOCKING WHEEL
SPRING SPIGOT
PRINT HEAD
LOCKING WHEEL
SPRING CLIP
PRINT HEAD
PIVOT SHAFT
PRINT HEAD
LOCKING SHAFT
PRINT HEAD
LOCKING WHEEL
LOCKING SPIGOT
PAPER GUIDE
TICKET BLADE
VIEW FROM TOP
STEPPER MOTOR
SECURING SCREW
PAPER OUT
MICROSWITCH
CABLE ASSEMBLY
EXIT
PAPER GUIDE ROLLER
SECURING SCREW
PRINT HEAD
PIVOT SHAFT
PAPER GUIDE
TICKET BLADE
STEPPER MOTOR
SECURING NUT
VIEW FROM BOTTOM
Figure 16. Dismantling The Printer Mechanism
7.4.10 Dismantling The Printer Mechanism
Refer to Figure 16 for information on the following operations.
•
Removing the Blade
(a)
With reference to Figures 16 and 17, remove the securing nut and washer
securing the blade locking piece in position.
