47
Calibration (LMLS-600 Only)
CALIBRATION (LMLS-600 ONLY)
The role of the calibration process is to establish,
for the controlled zone, the appropriate setpoint
for operation, to learn the dimming curves of the
controlled loads, and to create an initial daylight
ratio for closed-loop versus open-loop sensors.
This can be done Automatically or Manually.
Automatic Calibration
Automatic Calibration can be started by the
LMCT-100, a similar menu in LMCS, or by
pressing and holding the user pushbutton
(located on the bottom of the sensor, farthest
from the RJ45 connection) for three seconds.
S e n s o r C o n fi g u r a t i o n
L o a d C o n fi g ( P n L )
D a y l i g h t i n g C o n fi g
B u t t o n C o n fi g u r a t i o n
D i m m i n g C o n fi g u r a t i o n
M o r e
=
B AT
Press
Select
Press
Select
L M L S - 6 0 0 0 2 9 3 6 1 1 9 3 5
Z o n e S e t u p
C a l i b r a t i o n
Z o n e S e t t i n g s
A d v a n c e d S e t t i n g s
C o n t r o l M o d e
Choose
Calibration
D a y l i g h t i n g L M L S - 6 0 0
A u t o m a t i c C a l i b r a t i o n
M a n u a l C a l i b r a t i o n
P l e a s e l e a v e t h e a r e a
a n d r e t u r n a f t e r t h e
B l u e L E D s t o p s
b l i n k i n g
P r e s s ‘ S e l e c t ’ t o
c o n t i n u e o r ‘ H o m e ’ t o
c a n c e l A u t o C a l i b r a t e
C a l i b r a t i n g L M L S - 6 0 0
