WL500
Manual
Page 13 Revision 4‐10‐2019
8.
WL500
Water Treatment System
Sparkling Tank has a Level Sensor Probe that needs to be
maintained and descaled at every filter change.
WARNING!
HIGH PRESSURE COMPRESSED GAS HAZARD.
Isolate CO
2
gas supply and relieve
pressure in tank by opening PRV (pressure relief valve) before attempting to remove the Level
Sensor Probe or any other component under pressure.
9.
Ensure there is adequate (minimum of 2”) clearance around the unit and clean the condenser grill
and Compressor fan to provide efficient cooling system operation.
10.
Test the drip tray overflow function. Clean and dry off the drip tray and sensors.
11.
Sanitize the Cold and Sparkling Tanks per instructions in the pre‐installation procedures.
WARNING!
SANITIZER MAY CONTAIN HAZARDOUS CHEMICALS.
Use of proper personal
protective equipment such as rubber gloves and eye protection is required.
12.
Clean and sanitize external surfaces of the unit. Use soap and water or chemicals that are
compatible with ABS plastic and will not damage or degrade the product surfaces.
13.
Remove and clean the Faucet. Replace as needed.