![background image](http://html2.mh-extra.com/html/waterlogic/wl500-sparkling/wl500-sparkling_manual_3667426014.webp)
WL500
Manual
Page 14 Revision 4‐10‐2019
BYPASSING FILTERS
Older Models of the
WL500
Water Treatment System
may have filters installed and need to be
bypassed.
1.
Remove both
reverse threaded
filters in unit by
unscrewing filters
clockwise.
2.
Remove 6
Screws from
Front of the
WL500
Water
Treatment
System.
3.
Remove six screws
from back of Unit.
4.
Remove both Side Panels
5.
Remove Tube from Water Inlet to Filter.
LEFT SIDE OF UNIT
6.
Remove Tube
from Filter to
Tee at
Solenoid
RIGHT SIDE OF UNIT
7.
Attach new tube from Water Inlet to Tee at Solenoid. Care to be taken to ensure that the new
tube does not touch the compressor, nor any sharp edges.