WL500
Manual
Page 26 Revision 4‐10‐2019
PROGRAMING – HOT TEMPERATURE SETTING
The hot temperature can be set between 70°C to 95°C (158°F to 203°F) depending on which units are
selected (°C or °F) in the F/C programming setting.
Recommended / Default Temperature Setting: 87°C (189°F)
1.
Enter the Programming Mode in “Accessing Programming Mode” instructions.
2.
After entering the programming mode – Press Cold Selection Button (No. 1)
until “Hot Water” is displayed.
*Note:
Pressing Cold Selection Button (No. 1) scrolls programming options forward
Pressing Sparkling Selection Button (No. 2) programming options backward
3.
Press Hot Selection Button (No. 3) to see what the current setting is.
4.
Press Sparkling Selection Button (No. 2) to increase or decrease the
temperature setting.
Recommended / Default Temperature Setting: 87°C (189°F)
5.
Press Hot Selection Button (No. 3) to save the temperature setting chosen.
6.
Press Extra Hot Selection Button (No. 4) to exit programming mode.
Hot Water
3
2
3
4
1