![background image](http://html2.mh-extra.com/html/waterlogic/wl500-sparkling/wl500-sparkling_manual_3667426027.webp)
WL500
Manual
Page 27 Revision 4‐10‐2019
PROGRAMING – TEMPERATURE DISPLAY
Temperature display is the temperature that the display screen shows.
Static – Display will always show the STATIC (SET POINT) temperature – Recommended / Default
Ranging – The Display will show the temperature of the water in the tank.
1.
Enter the Programming Mode in “Accessing Programming Mode” instructions.
2.
Press Hot Selection Button (No. 3) to see what the current setting is.
3.
Press Sparkling Selection Button (No. 2) to select “Static” or “Ranging”
Recommended / Default Setting is STATIC
4.
Press Hot Selection Button (No. 3) to save the setting chosen.
5.
Press Extra Hot Selection Button (No. 4) to exit programming mode.
Temp Display
3
2
3
4