58 Device Description
WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
Manual
1.5.0
4.4.3
Address Selection Switch
Figure 29: Address Selection Switch (for example setting “0“)
The 8-pole DIP switch is used to set the IP address and to select the protocol for
setting the IP address.
Table 20: Meaning of DIP switch positions
Address
Meaning
0
The IP parameter is configured via the web-based management.
BootP, DHCP and application of the values from the EEPROM
are available to the user. In the default status, configuration via
BootP is activated.
1-254
The configuration of the IP address consists of the network
address and the value set for the DIP switch.
The network address is configurable and
192.168.1
for
Port 1
and
192.168.2
for
Port 2
by default.
255
The DHCP protocol is used to configure the IP parameters.