WAGO I/O-SYSTEM 750, Manual

Page: 283 / 450

WAGO-I/O-SYSTEM 750 Fieldbus Communication 283
750-882 Media Redundancy ETHERNET Controller
Manual
1.5.0
Instance 2
Table 219: TCP/IP interface (F5
hex
) – Instance 2 for ETHERNET Port X2
Attribute ID Acces
s
NV Name Data type Description Default
value
1 Get V Status DWORD Interface state -
2 Get V Configuration
Capability
DWORD Interface flags for possible
kinds of configuration
0x00000017
3 Set NV Configuration
Control
DWORD Specifies, how the device gets
is TCP/IP configuration after
the first Power On
0x00000011
4 Get V Physical Link
Object
STRUCT
of
Path size UINT Number of 16 Bit words in the
following path
0x0002
Path Padded
EPATH
Logical path, which points to
the physical Link object
0x20 0xF6
0x24 0x02
(equates to
the Ethernet
Link Object)
5 Set NV Interface
Configuration
STRUCT
of
-
IP Address UDINT IP address 0
Network Mask UDINT Network mask 0
Gateway
Address
UDINT IP address of default gateway 0
Name Server UDINT IP address of the primary
name of the server
0
Name Server
2
UDINT IP address of the secondary
name of the server
0
Domain Name STRING Default domain name “”
6 Set NV Host Name STRING Device name “”
Common Services
Table 220: TCP/IP interface (F5
hex
) – Common service
Service code Service
available
Service name Description
Class Instance
01
hex
Yes Yes Get_Attribute_All Supplies contents of all attributes
0E
hex
Yes Yes Get_Attribute_Single Supplies contents of the appropriate attribute
10
hex
No Yes Set_Attribute_Single Modifies an attribute value