WAGO I/O-SYSTEM 750, Manual, Page: 289 / 450

WAGO-I/O-SYSTEM 750 Fieldbus Communication 289
750-882 Media Redundancy ETHERNET Controller
Manual
1.5.0
Instance 3 – Internal Port 3
Table 224: Ethernet link (F6
hex
) – Instance 3
Attribute ID Acces
s
Name Data type Description Default value
1 Get Interface Speed UDINT Transfer rate 100 (0x64)
2 Get Interface Flags DWORD Interface
configuration and
status information
3 (0x03) – Link
active (Bit 0),
Full duplex (Bit 1)
3 Get Physical Address ARRAY of 6
UINTs
MAC layer address MAC ID of the
device
6 Set Interface Control STRUCT of: Configuration of the
physical interface
-
Control Bits WORD Interface
configuration bits
3 (0x03) – Link
active (Bit 0),
Full duplex (Bit 1)
Forced Interface
Speed
UINT Baud rate 100 (0x64)
7 Get Interface Type UINT Interface type 1 (0x01) – internal
Port
8 Get Interface Status UINT Interface status 1 (0x01) – active
9 Get Admin Status UINT Admin status 1 (0x01) – active
10 Get Interface Label SHORT_
STRING
Name of the interface “Internal Port 3”
Common Services
Table 225: Ethernet link (F6
hex
) – Common service
Service code Service
available
Service-Name Description
Class Instance
01
hex
Yes Yes Get_Attribute_All Supplies contents of all attributes
0E
hex
Yes Yes Get_Attribute_Single Supplies contents of the appropriate attribute
10
hex
No Yes Set_Attribute_Single Modifies an attribute value
Changes with service “Set_Attribute_Single” not directly effective!
Attributes (particularly the attributes 6 and 9) which were changed over the
service “Set_Attribute_Single”, become only effective after the next Power-On-
Reset of the controller.