Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 89

Page: 89 / 362

Putting into operation 4

BA TH412 * 06/2017 * 4512_4-1_Steuerstand_en.fm

4-15

Fastening the seat belt

1. Sit down on the operator seat with your back fully

touching the backrest.

2. Press unlocking lever 1 at the belt reel and put the seat

belt over your hips.
- Seat belt must not be twisted.

3. Insert buckle latch 2 into buckle 3, and release

unlocking lever 1 at the belt reel.

➥

The seat belt is locked.

Releasing the seat belt

1. Press the red button on the buckle.

➥

The seat belt is released.

2. Press unlocking lever 1 at the belt reel.

➥

The belt is reeled up.

Fig. 28

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands