Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 291

Page: 291 / 362

Maintenance 7

BA TH412 * 06/2017 * 4512_7-9_Kuehlsystem_en.fm

7-37

Environment

Possible environmental damage

►

Avoid releasing antifreeze and coolant.

►

Collect antifreeze and coolant, and dispose of them in
an environmentally friendly manner.

Information

Adapt the water/coolant mixture to the local conditions
and to the work site of the machine.

►

See chapter

on page 9-9 "Coolant"

for this.

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands