Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 194

Page: 194 / 362

5-68

BA TH412 * 06/2017 * 4512_5-11_Arbeitsbetrieb_en.fm

5 Operation

Grading and scraping

WARNING

Injury hazard to persons in the danger zone

Persons in the danger zone are possibly not seen and can
be injured during backward machine travel.

►

Adjust the existing visual aids (for example the
rearview mirrors) correctly.

►

Work particularly carefully when reversing the
machine.

►

Interrupt work immediately if persons enter the danger
zone.

Information

During dozer blade work in the reverse direction, the
telescopic boom can pull out if the stacking mode is
switched on.

►

Switch on the bucket mode during dozer blade work.

NOTICE

Risk of technical damage.

Risk of bending the hydraulic cylinder that extends and
retracts the telescopic boom. Avoid damage to the
telescopic boom.

►

Only perform leveling and digging work with the
telescopic boom fully retracted.

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands