Wacker Neuson Telehandler TH412, Operator'S Manual

Page: 169 / 362

Operation 5
BA TH412 * 06/2017 * 4512_5-9_Arbeitshydraulik_en.fm
5-43
Continuous operation of hydraulic connections on
the mast (option)
Hydraulic connections on the mast can be operated
continuously with this function. This function is required
for specific attachments with a hydraulic motor requiring
continuous power (for example a rotary broom). Holding
control lever
6 permanently is then not required.
Continuous operation of hydraulic connections
NOTICE
Technical damage due to overheating of hydraulic
system.
►
Always put the additional control lever 6 back to the
zero position if continuous operation is not required.
Continuous operation of the hydraulic connections is
switched on with the additional control lever
6 .
• Move the additional control lever 6 toward L, beyond
the resistance, until it locks into place.
➥
Continuous operation is switched on.
- Continuous operation is assigned to the connection
on the left, return is assigned to the connection on
the right.
• Move back additional control lever 6 beyond the resis-
tance.
➥
Continuous operation is switched off.
R
L
6
Fig. 75