Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 147

Page: 147 / 362

Operation 5

BA TH412 * 06/2017 * 4512_5-6_Beleuchtung_en.fm

5-21

Operating the hazard warning system (optional)

The working lights on the mast are operated with the
rocker switch

in Rocker switch panel 2.

•

Move the rocker switch

to position I.

- The control light

flashes.

➥

The turn indicators flash on either side.

•

Move the rocker switch

to position 0.

- The control light

does not flash.

➥

The turn indicators are switched off.

Information on the rotating beacon (option)

The rotating beacon is installed in the fixture provided for
this.

Information

Use the rotating beacon is accordance with the legal
regulations!

Fig. 53

Fig. 54

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands