Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 111

Page: 111 / 362

Putting into operation 4

BA TH412 * 06/2017 * 4512_4-3_Warnleuchten_en.fm

4-37

Steering-column control lever (option)

The steering-column control lever

is located on the left

of the steering column. The following functions can be
operated with the steering-column control lever:

•

Turning the lever operates the side marker lights and
travel lights.

•

Pressing the lever forward/backward operates high
beam/low beam.

•

Pressing the lever upward/downward operates the
right/left turn indicators.

•

Pressing the horn symbol operates the horn.

➥

Operating the vehicle lighting on page 5-19

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands