Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 179

Page: 179 / 362

Operation 5

BA TH412 * 06/2017 * 4512_5-10_Anbaugeraete_en.fm

5-53

Coupling hydraulic connections

Preparations

The pressure on the hydraulic connections has to be
released before they can be coupled.

1. Retract the telescopic boom completely.
2. Lower the attachment until it is barely above the

ground.

3. Stop the engine.
4. Move the control lever

back and forth several times.

➥

The pressure on the hydraulic connections on the
loader unit is released.

5. Remove the protective caps from the loader unit

connections.
- To do this, press the connections forward together

with the hydraulic hose.

6. Remove the protective caps from the hydraulic

connections of the attachment.

Fig. 80

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands