Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 128

Page: 128 / 362

5-2

BA TH412 * 06/2017 * 4512_5-2_Gasbetaetigung_en.fm

5 Operation

5.2

Accelerator actuation

Accelerator pedal

The engine speed is variably regulated with the drive
pedal

(accelerator pedal). This affects the work

movements of the loader unit and the attachments, the
hydraulic functions of the attachments and the travel
speed.

Dirt accumulation and objects in the area of the
accelerator pedal can result in malfunctions.

Information

Maximum speed depends on the speed range selected!

Fig. 42

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands