Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 153

Page: 153 / 362

Operation 5

BA TH412 * 06/2017 * 4512_5-9_Arbeitshydraulik_en.fm

5-27

5.9

Work hydraulics

Safety instructions on the loader unit control lever

WARNING

Accident hazard due to uncontrolled movements of
the control lever!

Uncontrolled movements of the control lever can cause
serious injury or death.

►

Operate the machine only from the operator seat.

►

Work calmly and carefully.

►

Avoid fast and sudden movements of the control lever.

►

Always lower the loader unit/loader unit to the ground
during work interruptions or when finishing work.

►

Secure the control lever before performing machine
travel on public roads.

►

Secure the control lever before leaving the machine.

WARNING

Crushing hazard due to tipping over of machine!

A tipping vehicle can cause serious injury or death. There
is a tipping hazard, in particular in curves.

►

Keep the loader unit lowered during machine travel.

►

Adapt the travel speed to the prevailing conditions.

►

Adapt the driving speed to the material loaded.

►

Pay attention to persons and obstacles.

►

Pay attention to the machine’s tilting limit.

►

Reduce travel speed before performing downhill
machine travel.

►

Always fasten your seat belt.

►

Ensure that no parts of the body protrude outside the
vehicle.

►

Carefully steer the machine if the loader unit is raised.

►

Do not exceed the permissible payloads.

Operation

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands