Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 172

Page: 172 / 362

5-46

BA TH412 * 06/2017 * 4512_5-10_Anbaugeraete_en.fm

5 Operation

Re-equipping attachments

WARNING

Risk of injury to persons in the danger zone!

Persons in the danger area are possibly not seen and can
be injured during backward machine travel.

►

Adjust the existing visual aids (for example the
rearview mirrors) correctly.

►

Work particularly carefully when reversing the
machine.

►

Interrupt work immediately if persons enter the danger
zone.

WARNING

Accident hazard due to unintentional release of the
hydraulic lock!

Incorrectly locked attachments can be unintentionally
released and cause accidents.

►

Always check the attachments for correct locking.

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands