Wacker Neuson Telehandler TH412 Operator'S Manual Download Page 243

Page: 243 / 362

Transportation 6

BA TH412 * 06/2017 * 4512_6-1_Abschleppen_en.fm

6-1

Transportation

6.1

Towing the machine

Information on towing

WARNING

Accident hazard due to towing of machine!

Towing the machine can cause accidents in certain
situations, and serious injury or death.

►

Only tow the machine if the steering and braking
systems are fully functional.

►

Only tow the machine with towing gear of sufficient
dimensions.

►

No persons are allowed to stay in the range of action
of the towing gear during towing.

►

Secure the machine against unintentional movement
and unauthorized use once towing is over.

WARNING

Accident hazard when pulling trailer loads!

Pulling trailer loads can cause accidents, and serious

injury or death.

►

Do not use the towing gear to tow trailer loads.

►

Only hitch trailer loads if the machine is equipped with
special towing gear.

Transportation

Summary of Contents for Telehandler TH412











































































































































































































































































































































































Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands

Wacker Neuson Telehandler TH412, Operator'S Manual

Search results

Summary of Contents for Telehandler TH412

Reviews:

Related manuals for Telehandler TH412

Brands by name

Popular brands