VTEL Galaxy, Installation And Configuration Manual

Page: 12 / 76

Installation and Configuration Guide
Chapter 2. Installing Cabinets
2.2
An assembled single-monitor system in Galaxy M3 furniture (Figure 2-2).
Figure 2-2 Galaxy Single-Monitor System in M3 Furniture
Installing the Primary Cabinet
Prepare the system for installation in the room where it will be located.
You will need an assistant to help you install the tube frame
furniture.
1. After you have removed all boxes from shipping containers, carefully roll the furniture onto the floor
using the enclosed ramp and place it in an open area for assembly.
The PC and most of the system cabling were factory installed. It is
recommended pre-installed components not be removed or
altered.
2. Locate the cabinet keys inside the peripherals box and unlock the front cabinet doors, if necessary. The
rear cabinet door (Galaxy tube frame furniture only) is shipped separately and may be attached at the
end of the installation.
Single monitor system
in Galaxy M3 furniture.