VTEL Galaxy, Installation And Configuration Manual

Page: 55 / 76

Expert Screens
8.7
Galaxy
TM
T1 PRI — Advanced WAN settings
Figure 8-9 Advanced WAN Settings - T1 PRI
If you enable DWS dialing (also called Multirate) all calls
must be at a line rate that is a multiple of 64.
E1 Dedicated — Advanced WAN settings
Figure 8-10 Advanced WAN Settings - E1 Dedicated
Select the
Network Switch
you
are using.
Select the methods
specified by your network
provider.
Check this box if your service
includes
Dialable Wideband
Service
. The network guarantees
that the timing between B
channels will be synchronized.
Enter the number here for at least the
first channel. If you are not using the
same number for every channel, you
must enter all of them.
If the PRI line is shared by several
users, and if each channel requires
a separate number, uncheck this
box.
Check this box to use the
ADI
method of encoding the bits on
the line.
Check this box if your system will
provide the network clock. Leave
it unchecked if you will use the
timing signal received from the
network.
Enter the settings
specified by your
network provider.