G
ATEWAY
C
ONTROLLER
S
ERIES
U
SER
M
ANUAL
VALUEPOINT NETWORKS, INC. ALL RIGHTS RESERVED
P
AGE
35
OF
135
4 . R
O U T I N G
This menu allows you to configure the Routing Table in the Gateway Controller.
Screen 6
Routing
Current Routing Table
You can see the current routing table and add/delete static routes. This may be
required for more complex network topologies. Use the current route table to add
routes temporarily. If you wish to add permanent routes that are recreated on
boot, use the persistent route table.
Delete
Delete the current route. This option is not available for
all routing table entries. If you remove an important
entry, you may need to reboot to restore the table.
Add Route
Add a temporary route to the current table.
Persistent Routes
If there is a permanent route required for your configuration, enter it in the Persistent Routes
table. These routes will be recreated whenever the Controller boots.
Delete
Delete the persistent route.
Add Route
Add a persistent route to the current table.
