APS787Z_RevD_07/20
27
Adjusting the Shock Sensor
1. Arm the system, wait 5-10 seconds, then with an open palm carefully apply impact to areas of the vehicle to test the
shock sensor’s sensi�vity.
2. To adjust, turn the adjustment knob on the shock sensor counter-clockwise for less sensi�vity; clockwise for more
sensi�vity.
3. If the proper sensi�vity s�ll cannot be achieved, re-locate the shock sensor.
Troubleshooting Trigger Zones
Test the doors, hood, trunk, and shock sensor to ensure they trigger the security system. Once triggered, the LED flashes
to indicate the trigger source:
Troubleshooting Remote Start
All Pres�ge remote start system will provide parking light feedback to display remote start errors or shutdowns. The
vehicle parking lights will flash to display error or shutdown code.
1 Shock
2 Trunk / Hood
3 Door
1 Run
�
me Expired
2 Remote Shutdown
3 Brake On
4 Manual Mode
5 Hood Open
6 Low / No Tach
7 Tach Programming
8 High Tach
User Selectable LED
This feature will control whether the LED is ON or OFF when the system is Armed/Locked. This will be selectable in
feature programming OR on-the-fly without entering the programming feature banks.
1. Turn the igni�on ON, OFF, ON, OFF.
2. Press and hold valet bu�on for five (5) seconds.
The LED will flash one (1) �me for ON, two (2) �mes for OFF. This feature will not affect LED flash during programming.
Quick Reference:
Programming & Diagnos�cs
