APS787Z_RevD_07/20
17
Detailed Descriptions:
Setup Op�ons
Negative Output Control
(NOC)
Nega�ve Output Control (NOC) allows the installer to program any NOC output for any NOC op�on. For example, if
an installer is not using the GREEN/WHITE Dome Light output, but requires a second Remote Start Status Output, the
system can be programmed to change the output type. Once programmed in the NOC Menu, the GREEN/WHITE wire will
operate with the same func�on as the LIGHT BLUE (Remote Start Status).
Note: This can only be programmed using the FlashLogic Weblink or Weblink Mobile.
Headlight
Defrost
LED
Ch. 4 AUX
Ch. 5 AUX
Ch. 6 AUX
Ch. 7 AUX
Factory Disarm
Factory Arm
Accessory
Pulse During Crank
Pulse A
�
er Shutdown
Lock
Unlock
2nd Unlock
Trunk
Remote Start Status
Igni
�
on
Ground While Armed
Ground While Disarmed
Domelight
Trunk Release
This op�on supplies a pulse when the trunk func�on is ac�vated from the remote control or system.
Door Lock
This op�on supplies a pulse when the Lock func�on is ac�vated from the remote control or system.
Door Unlock
This op�on supplies a pulse when the Unlock func�on is ac�vated from the remote control or system.
2nd Door Unlock
This op�on supplies a pulse when the Unlock func�on is ac�vated from the remote control or system (2) two �mes
within 10 seconds.
This requires Feature Bank 2, Feature 10 to be programmed ON.
Remote Start Status
This output supplies an output for the en�re remote start run�me programmed in Feature Bank 3. This output will
ac�vate before the Igni�on output and remain on for 4sec a�er shutdown.
Ignition
This op�on will supply an output for the en�re remote start run�me programmed in Feature Bank 3. This output will
turn on a�er Remote Start Status and remains on during engine crank. This output will turn off with shutdown.
Accessory
This op�on will supply an output for the en�re remote start run�me programmed in Feature Bank 3. This output will
turn on a�er Remote Start Status and will turn off during engine crank. This output will turn off with shutdown.
Factory Disarm
This op�on supplies output before remote start and when the unlock func�on is ac�vated from the remote control or
system.
Factory Arm
This op�on supplies an output a�er remote start and with the lock func�on from the remote control or system.
