Voxx Electronics APS787Z, Installation And Reference Manual

Page: 13 / 33

APS787Z_RevD_07/20
13
Detailed Descriptions: Setup Op�ons
Remote Start Control (Bank 3)
See page 23 for Programming Instruc�on.
1 Chirp 2 Chirp 3 Chirp 4 chirp 5 Chirp 6 Chirp
1 Defrost Output Pulsed 10min RS Run
�
me
2 RS Start No
�fi
ca
�
on
ON
OFF
3 RS Run
�
me
15min
20min 45min 60min 5min 10min
4 RS Parking Lights
Steady
Flashing
5 Engine Con
fi
rma
�
on
Tach
Voltage Data Hybrid
6 Voltage Level
>0.5v B4 Start
<0.5v B4 Start
7 Igni
�
on 2 Output Igni
ti
on Accessory Start
8 Igni
�
on 3 Output Igni
ti
on Accessory Start
9 Accessory Output Accessory Igni
�
on Start
10 Transmission Auto Manual
11 Max Crank Time 0.8sec 1.0sec 1.5sec 2.0sec 3.0sec 4.0sec
12 Diesel Delay OFF Diesel 5 Diesel 10 Diesel 15 Diesel 20 Diesel 30
13 Temperature Start OFF 14F 5F 0F -4F -14F
14 Crank Dura
�
on Averaging Preset
15 RS Shock Override Shunt un
ti
l Clear Shunt RS Cycle Shunt From TX
16 Turbo Timer OFF 3min 5min 10min
17 Start Ac
�
va
�
on Two Press One Press Three Press
18 RS Lock Func
�
on No Change UL Before L A
�
er UL Before Start Lock A
�
er Start
19 Factory Disarm Output Single Pulse Double Pulse 350ms 500ms 800ms Same As Bank 2, F1
20 Addi
�
onal Unlock Pulse No Pulse IGN, ACC, GWR IGN,ACC,GWR,PASD
Fe
a
tu
re
s
Feature Bank 3
Op
�
ons
Feature 1: Defrost Output Duration
Func�on: Set the Defrost output to activate for a set time.
Setting Choices:
• Option 1 -
Output pulses for
1 second
.
• Option 2 - Output stays on for 10 minutes.
• Option 3 - Output stays on for the duration of the Remote Start Runtime .
Feature 2: Remote Start Notification
Func�on: Set remote start activation confirmation beeps on or off.
Setting Choices:
• Option 1 - On - System emits an audible beep when remote start is ac�vated.
• Option 2 -
OFF -System
remains silent
when remote start is ac�vated.
Feature 4:
Remote Start Parking Light Duration
Func�on: Set parking light output to turn on or flash lights during remote start.
Setting Choices:
• Option 1 - Lights remain on during remote start.
• Option 2 - Lights flash during remote start.
Feature 3: Remote Start Run Time
Func�on:
Set the maximum remote start run time if the vehicle is not entered after activation.
Setting Choices:
• Option 1 - Engine will run for 1
5
minutes .
• Option 2 - Engine will run for 20 minutes .
• Option 3 - Engine will run for 45 minutes .
• Option 4 -
Engine will run for
60 minutes
.
• Option 5 - Engine will run for
5
minutes .
• Option 6 - Engine will run for 10 minutes .