Voxx Electronics APS787Z, Installation And Reference Manual

Page: 15 / 33

APS787Z_RevD_07/20
15
Remote Start Control (Bank 3) (cont.)
See page 23 for Programming Instruc�on.
Detailed Descriptions: Setup Op�ons
Feature 12: Diesel ( Pre-Start) Delay
Func�on: After remote start ignition is activated, set delay of crank to accommodate diesel engines.
Setting Choices:
• Option 1 -
Vehicle starts
immediately
a�er remote start igni�on.
• Option 2 - Start is delayed for
5
seconds a�er remote start igni�on.
• Option 3 - Start is delayed for 10 seconds a�er remote start igni�on.
• Option 4 - Start is delayed for
15
seconds a�er remote start igni�on.
• Option 5 - Start is delayed for 20 seconds a�er remote start igni�on.
• Option 6 -
Start is delayed for
30 seconds
a�er remote start igni�on.
Feature 13: Temperature-Based Start Setting
Func�on:
Set the outside temperature that will automatically trigger the start function.
Setting Choices:
• Option 1 - Temperature-based start is inactive .
• Option 2 - Vehicle will start when temperature drops below 14 ° F .
• Option 3 - Vehicle will start when temperature drops below 5 ° F .
• Option 4 -
Vehicle will start when temperature drops below
0 ° F
.
• Option 5 - Vehicle will start when temperature drops below -4 ° F .
• Option 6 - Vehicle will start when temperature drops below -14 ° F .
Note: Requires Ac�va�on with Remote.
Feature 14: Crank Duration
Func�on: Set how the system will determine how long to crank the starter.
Setting Choices:
• Option 1 -
Starter will crank based on
average of last 8 times
the vehicle was started with the key.
• Option 2 - Starter will crank for maximum time
as set in
Bank 3, Feature 11 .
Feature 15: Remote Start Shock Sensor Override
Func�on:
Set Shock Sensor Operation with Remote Start.
Setting Choices:
• Option 1 - Shock Sensor will turn off when remote start is engaged and will turn on if no vibra�on is detected
a�er the engine is running.
• Option 2 - Shock senor will turn off for the dura�on of the Remote Start Run�me.
• Option 3 -
Shock sensor will turn off if Lock is pressed while vehicle is remote started.
Feature 16: Turbo Timer Setting
Func�on:
Set the time that the engine remains running after the vehicle is turned off with the key.
Setting Choices:
• Option 1 - Turbo �mer func�on is inactive .
• Option 2 - Vehicle will remain running for 3 minute .
• Option 3 - Vehicle will remain running for 5 minutes .
• Option 4 -
Vehicle will remain running for
10 minutes
.