APS787Z_RevD_07/20
6
Detailed Descriptions:
Wire Harness Colors and Func�ons
Input / Output Connector (22-pin connector) (Cont.)
See page 30 for the full system diagram.
These wires are listed in order of their placement in the harness connector.
21. DARK BLUE – Trunk Release Output (-) (NOC 9)
At its default setting, the DARK BLUE wire connects to the vehicle trunk release wire or relay and supplies Ground (-)
when ac�vated from the remote control.
Verification:
The vehicle trunk release wire registers 12-Volt (+) or Ground (-) when the trunk release bu�on is ac�vated.
Note:
This wire can be programmed to perform the
Parking Lights Output
func�on by changing its op�ons.
Refer to
Bank 2, Feature 14
on page 9
and
NOC Programming on page 17.
20. RED – Door Lock (-) (NOC 10)
The RED wire supplies Ground (-) when the Lock func�on is ac�vated from the remote control or system.
Verification:
The vehicle lock wire registers 12-Volts (+) or Ground (-) when the Lock bu�on is ac�vated. Addi�onal parts
may be required.
See Page 29 for common door lock wire diagrams.
Note:
This wire is programmable. Refer to NOC Programming on page 17.
22. GREEN – Door Unlock (-) (NOC 11)
The GREEN wire supplies Ground (-) when the Unlock func�on is ac�vated from the remote control or system.
Verification:
The vehicle lock wire registers 12-Volt (+) or Ground (-) when the Unlock bu�on is ac�vated. Addi�onal parts
may be required.
See Page 29 for common door lock wire diagrams.
Note:
This wire is programmable. Refer to NOC Programming on page 17.
