APS787Z_RevD_07/20
11
Security Control (Bank 2) (Cont.)
See page 23 for Programming Instruc�on.
Detailed Descriptions:
Setup Op�ons
Feature 14:
Park Light / Trunk Relay Function
Func�on:
Reverse the functionality of the trunk and park light outputs (i.e. when the built-in relay is needed for the
trunk connection but not needed for the park light connection).
Setting Choices:
• Option 1 -
Func�onality follows
default settings
.
• Option 2 -
The
Trunk Release Output (Dark Blue)
wire works with the Parking Lights func�on; the
Parking
Lights Input (White/Red)
and
Parking Lights Output (White)
wires work with the trunk release func�on.
Feature 15:
Data Bus (DBI) Port Protocol
Func�on:
Set functionality of the data bus connector to accept integration modules of differing protocols.
Setting Choices:
• Option 1 -
The data bus connector will be configured to work with modules that use the
ADS Protocol.
• Option 2 -
The data bus connector will be configured to work with modules that use the
DBI Protocol.
Feature 13:
Door Trigger Input Detection
Func�on:
Set the system to detect 12-Volt (+) or Ground (-) when the vehicle door is opened.
Setting Choices:
• Option 1 -
Door Trigger detec�on is set for
Ground (-).
• Option 2
- Door Trigger detec�on is set for
12-Volt (+).
Fea
ture 11:
Silent Choice
TM
Func�on:
Set audible beeps on or off when arming and disarming the system.
Setting Choices:
• Option 1 -
Pressing Lock or Unlock at any time
will perform the func�on
with audible beeps.
• Option 2 - Pressing Lock or Unlock for 1.5sec
on remote will control system
without an audible beep.
• Option 3 - First press
of Lock or Unlock on the remote control will perform the func�on
without an audible
beep
.
Second press within 10sec will result in audible beeps
.
Feature 10:
Driver Priority Unlock
Func�on:
Set the behavior of unlock outputs when arming and disarming the system.
Setting Choices:
• Option 1 -
Unlock pulse will be on the
Green wire unlock output only
.
• Option 2 - First press
of unlock on remote will pulse
Green wire
;
Second press within 10sec
will pulse
RED/BLACK wire.
Feature 12:
Security Profile
Func�on:
Set the system to function as a keyless entry / convenience system or full-featured alarm / convenience
system.
Setting Choices:
• Option 1 -
All security, keyless entry and convenience features are
enabled
.
• Option 2 - Door
Trigger zone is
disabled
.
• Option 3 - Hood and Trunk
Trigger zones are
disabled.
• Option 4 - All
security trigger zones are
disabled.
• Option 5 - All security zones are enabled: Doors, Hood, and Trunk will be bypassed for five (5) seconds
with Ignition ON ; Shock will be bypassed anytime Ignition is ON.
