APS787Z_RevD_07/20
20
Programmable Input Control (PIC Control)
Programmable Input Control (PIC) allows each PIC input to be customized to the user or vehicle's need. See the list below
for a detailed descrip�on of the available op�ons. PIC Inputs can only be programmed using the FlashLogic Weblink or
Weblink Mobile.
Detailed Descriptions:
Setup Op�ons
Door Trigger Input
This op�on will be used for all Door trigger func�ons including Alarm Trigger. If using an LCD RF kit this input will display
the Door icon when the Alarm is triggered.
N.C. Door Trigger
External Start Ac
�
va
�
on
Pre-Warn Shock Trigger
Diesel Glow Plug
Door Trigger
Full Shock Trigger
Trunk Trigger
Parking Brake
Hood Trigger
Brake
Trunk Trigger Input
This op�on will be used for all Trunk trigger func�ons including Alarm trigger. If using an LCD RF kit this input will display
the Trunk icon when the Alarm is triggered.
Hood Trigger Input
This op�on will be used for all Hood trigger func�ons including Alarm trigger. If using an LCD RF kit this input will display
the Hood icon when the Alarm is triggered.
Normally Closed Door Trigger Input
This op�on will be used in vehicles with a Normally Closed Door Trigger. This type of circuit will be show Ground (-) or
Posi�ve (+) when the vehicle door is closed then switch to an Open Circuit when the door is open. If using an LCD RF kit
this input will display the Door icon when the Alarm is triggered.
Pre-Warn Shock Trigger Input
This op�on will be used to add addi�onal security sensors to the alarm system. When this input is detected the system
will beep four (4) �mes quickly to warn away any poten�al thief. If using an LCD or LED RF kit this input will not provide a
warning when the Pre-Warn input is detected.
Full Shock Trigger Input
This op�on will be used to add addi�onal security sensors to the alarm system. When this input is detected the system
will trigger a full alarm cycle. If using an LCD RF kit this input will display the Shock icon when the alarm is triggered.
Parking Brake Input
This op�on will be used for all Parking Brake func�ons such as Turbo Timer and Manual Transmission Ready Mode.
Brake Input
This op�on will be used for all Brake func�ons such as Remote Start and Alarm trigger. If using an LCD or LED RF kit this
input will provide a warning when the Alarm is triggered.
External Start Activation Input
This op�on will be used to ac�vate or deac�vate the Remote Start. This input is configurable using Feature Bank 3,
Feature 17.
Diesel Wait to Start Input
This op�on will be used to control the Diesel Wait to Start func�on. This input is configurable using Feature Bank 3,
Feature 17. When this input is detected, the system will wait un�l the input is cleared before cranking the vehicle's
starter. Diesel Wait to Start mode must be ac�vated in Feature Bank 3, Feature 12.
