VoxBox Lite Edition, User Manual

Page: 91 / 127

Programming Forms
Installation and Programming Manual A-7
Voice and DTMF sensitivity
*376 + X + Y
X = 1; Voice sensitivity level
X = 2; DTMF sensitivity level
Y = Level (0-9), 9 = Most sensitive
Default: 5
Note: To activate the new selection, a new call
must be initiated
3.3
PBX PARAMETERS (CONT’D)
OPERATION COMMAND SECTION
Automatic Gain Control (AGC
) *377 + X
X = 0 AGC disabled
X = 1 AGC enabled
(Default)
Note: To activate the new selection, a new call
must be initiated
3.3
DTMF amplitude *379 + X
X = volume level (3-9), 9 = Loudest
Default: 5
3.3
Procedural codes sent to the PBX
in order to perform a specific task *380 + X + Code #
X = 1; LED1 notification code
X = 2; LED2 notification code
X = 3; LED off code
X = 4; Transfer code
X = 5; Recall from Busy
X = 6; Recall from No Answer
Code = Respective PBX code
1
3.3
Delete a specific procedural code *380 + X + #
X = 1; LED1 notification code
X = 2; LED2 notification code
X = 3; LED off code
X = 4; Transfer code
X = 5; Recall from Busy
X = 6; Recall from No Answer
3.3
Dial a String from the Auto
Attendant to the PBX *381 + X + YY…YY + #
X = String number (0-9)
YY…YY = DTMF string
3.3