Programming Commands
A-6
Installation and Programming Manual
Transfer mode for all extensions
*350 + X + Y
X = 1; All extensions except the operator
X = 2; Operator extension only
Y = 0; Non Supervised
Y = 1; Supervised Mode
Y = 2; Semi Supervised mode
3.7.6
PBX PARAMETERS (CONT’D)
OPERATION
COMMAND
SECTION
Day operator, Night operator, Fax
and Supervisor’s extensions
*360 + X + YYYY + #
X = 1; Day operator
X = 2; Night operator
X = 3; Fax extension
X = 4; Supervisor extension
YYYY = Corresponding extension number.
3.3
Delete a specific extension
assignment
*360 + X + #
X = 1; Day operator
X = 2; Night operator
X = 3; Fax extension
X = 4; Supervisor extension
3.3
Volume level
*369 + X
X = volume level (0-9), 9 = Loudest
Default: 5
3.3
Flash 1
*370 + XXX
3.3
Cadence of system input and
output tones in milliseconds
*371 + X + YYYY
X = 1; busy off
X = 2; busy on
X = 3; Disconnect off
X = 4; Disconnect on
X = *; DTMF off
X = #; DTMF on
YYYY = Cadence in milliseconds in steps of
20 milliseconds
3.3
Busy signal cadence check
*375 + XXXX + #
3.3
