background image

TROUBLESHOOTING  

7-2 

Installation and Programming Manual 

Question: 

External Notification does not work. 

Answer: 

• 

Make sure you have selected the correct External Access code. 

• 

Make sure you did not add the External Access code to the 
telephone number because the VoxBox

 

automatically dials the 

External Access code. 

• 

Make sure External Notification is allowed and enabled. 

• 

The first notification can take up to the amount of time that is 
defined by Ring Notification Interval. 

• 

Make sure start and stop times are properly defined and 
maximum number of retries has not been reached. 

 

 

Question: 

The VoxBox does not transfer calls. DTMF tones are heard or the 
call is disconnected. 

Answer: 

• 

Flash 1 has been incorrectly configured. 

 

 

Question: 

When I dial command code *300, the VoxBox plays an error 
message. 

Answer: 

• 

You are trying to change the number of digits in an extension 
after extensions and mailboxes have been configured. To 
change the number of digits in an extension, you must first 
remove all mailboxes and extensions. 

 

 

Question: 

Command *510 does not allow a mailbox to be deleted. 

Answer:

 

• 

The mailbox is used in script menus. Please remove the 
mailbox from all the scripts and then use the delete command.

 

Summary of Contents for Lite Edition
































































































































Reviews:

Related manuals for Lite Edition