DTMF
Programming
3.7.2.5 Transfer to a Script Message and Change the Language
Changes the system language and plays another script message. The VoxBox
supports up to three system languages simultaneously (factory loaded).
Command:
*117 + XX + B + YY + Z + #
XX refers to the current script message
B refers to the digit dialled by the caller during playback of script
message XX
YY refers to the destination script message
Z refers to the system language digit (1, 2 or 3)
Example: *117 00 7 01 3 #
The VoxBox changes to the third language and plays script message
01 when “7” is dialled during playback of script message 00.
Note: Make sure that script message 01 has been recorded in the appropriate
language.
3.7.2.6 Select the Default Language
The VoxBox can support up to three languages. The default language is the
language the VoxBox automatically uses if no other language has been selected.
To change the default language, dial *900 and the administrator password to enter
the programming mode, then dial:
*118 + Z + #
Z = 1 is the first language (default)
Z = 2 is the second language
Z = 3 is the third language
Note: he available languages are listed on the bottom panel of the VoxBox.
Installation and Programming Manual
3-21
