DTMF
Programming
3.8.1.2 Changing the Operator’s Password
The System Administrator can change the operator’s password by dialling code
*900 to enter the programming mode, dialling the System Administrator’s
password and then dialling:
*601 + * + Old Pa New Pa #
Operator’s password must be 4 digits.
Warning:
Do not use * and # keys.
To disable the operator’s password, enter “0000”.
3.8.1.3 Resetting the Mailbox Password
The System Administrator can reset a mailbox password to its default (1234) by
dialling code *900 to enter the programming mode, dialling the System
Administrator’s password and then dialling:
*570 + XXXX + #
where XXXX is the mailbox number.
The mailbox owner can change the mailbox password. Please refer to section
5.4.4 for more information.
3.8.2 Activate Force Reorganize
The force reorganize option automatically reorganizes and optimises the data
stored in the VoxBox.
The system administrator can activate the Force Reorganize option by calling the
VoxBox and, during the opening greeting, dialling:
*900 + Pa *610
Important:
This option cannot be deactivated, and
should be activated by a certified technician only.
Installation and Programming Manual
3-31
