Programming Commands
A-4
Installation and Programming Manual
IN-BAND DTMF PROGRAMING COMMANDS
OPERATION
COMMAND
SECTION
Select a task for an In-Band
DTMF code
12 = Play the Directory Listing (DBN)
13 = Transfer to a mailbox*
14 = Transfer to an extension*
15 = Transfer to the operator
* = A destination must be defined for these
tasks
6.1.2
Select a destination for an In-
Band DTMF event
*202 + XX + YYYY + #
XX = Event No.
YYYY = Destination
6.1.3
Delete the destination for a
specific In-Band DTMF event
*202 +XX + #
XX = Event No.
6.1.3
Delete all destinations
*202 + #
6.1.3
MATRA Support
*204 + X
6.1.6
Define the time to wait for the
first DTMF character in the In-
Band DTMF code.
*210 + XXXX
XXXX = 0000-9980 in steps of 20 ms
6.1.4
Define the time to wait between
receipt of each DTMF character
in the In-Band DTMF code
*211 + XXX
XXX = 000-980 in steps of 20 ms
6.1.5
Define Transfer Supervision
Type
*220 + X
X = 0; Use Call Progress Tones
X = 1, Use DTMF codes
3.7.5
Define the DTMF code for the
Answer, Busy and DND
conditions
*221 + X + Code
1
+ #
X = 1; Answer condition
X = 2; Busy condition
X = 3; Do Not Disturb condition
Code
1
= DTMF code sent by the PBX for the
Transfer Supervision operation
3.7.5
Delete the DTMF code for a
specific condition
*221 + X + #
X = 1; Answer condition
X = 2; Busy condition
X = 3; Do Not Disturb condition
3.7.5
Delete the DTMF code for all
conditions
*221 + #
3.7.5
