DTMF Programming
3-18
Installation and Programming Manual
Table 3-7 Commands for Recording Script Messages
OPERATION
COMMAND
Recording a script message
*100 + XX + Beep + #
Playback a script message
*101 + XX
Deleting a script message
*102 + XX
Note: XX is script message 00-26, 31-36 and 41-46
.
3.7.2 Programming Script Messages
You can program each script message separately. The programming command
format for script messages is:
* + Command Code + XX + B + YY + #
where:
•
Command Code
defines the action that should be taken when B is pressed
during playback of script message XX.
•
XX
refers to a script message number.
•
B
refers to the digit dialled by the caller during playback of script message XX
or at the end of the message. B can be 0-9 or * (for end of message).
•
YY
refers to the destination, which can be an extension, mailbox or another
script message.
IMPORTANT: Do not define the Operator ID digit on script messages.
Table
3-1
describes how to define the operator ID digit which is then automatically
reserved on all script messages.
The command codes used to build the Automated Attendant Script Menu are
presented on the following pages. You can program one of the following actions
for each script message:
•
Play another script message
•
Return to the opening menu
•
Play another script message and change the language
