Vodavi Starplus STSe, Quick Start Manual

Page: 51 / 72

STSe Quick Start Guide September 2005
- 47 -
VO D AVI
WIN DBA (cont’d)
Programming STSe System Using WIN DBA Software
(Refer to “Programming STSe Telephone System” for programming steps.)
To start a New File using WIN DBA Software:
1. Click the Edit folder.
2. Click on “Cards or the Cards Icon. Configure card slots as required.
3. Click CO Line Programming or CO Line Icon. Program Ringing Assignments for each CO as required.
(Note the copy feature).
4. Click the CO folder and select “Preset Forward”: Change “None” to “Voice_Mail”. In block to right, enter
the number “1” and press
ENTER .
5. Click the Timers folder and enter timer for “Preset Forward”. Preset Forward is now set, so the Auto-
attendant would answer call if no one answers a CO line.
6. Save data and click on the “X” to exit.
7. Click on Station Programming or the Icon.
8. Select the Buttons folder and program the buttons for each phone. (Note the copy feature also).
9. Select the Preset Fwd folder. Enter “Voicemail” for Internal No Answer; External No Answer; and Internal
Busy. Do not use External Busy if phone rings on Incoming CO calls. In block to right of each item, enter
“1”. At top is timer for No Answer, enter time as required.
10. Save and click on “X” to exit.
11. If CO Port is available but not used, select CO Line Programming. Select CO Line that is not used and
change CO Group to “0”.
12. Save and click on “X” to exit.
13. Refer to “Connecting to KSU” and upload data from Laptop (PC) to KSU and follow procedures to upload
data.