Vodavi Starplus STSe, Quick Start Manual

Page: 36 / 72

STSe Quick Start Guide September 2005
- 32 -
VO D AVI
PROGRAMMING & INSTALLING ACCESSORY DEVICES (cont’d)
External Paging
24V DC
Power
Supply
Speaker
The relay contact can be used for external paging. The dial code for external
paging is 761. Programming the relay is found in FLASH 14. Installation of
external page is the same as previous slide.
External page can also be programmed through a CO port. This is normal when a
page control unit is used for several different page zones. When this procedure
is used program the CO port (used for paging) to a CO line group other than the
CO line group used for active CO lines (example CO line group 2). Programming
of CO Line group found in FLASH 40. Identify the CO port on a flexible button
as external page.
NOTE … Stations allowed to external page must be allowed access to the Line
group identified for external page, FLASH 50. (See Multi-Zone Page Control
slide also.)
Installation of External Page:
Relay or
CO Port
VL/OR
OR/VL
T
R