Vodavi Starplus STSe, Quick Start Manual

Page: 17 / 72

STSe Quick Start Guide September 2005
- 13 -
VO D AVI
HARD DRIVE VOICEMAIL PROGRAMMING
The two required programming methods, touch-tone phone and laptop with CD-ROM), are used to program the
Hard Drive voicemail.
- Laptop Requirements: straight through DB9 "Serial Cable"
Installing Software Onto Your PC
1. Place the In-Skins Admin software CD in the CD-ROM drive on your computer.
2. The Wizard should load CD software. When the CD finishes loading, "click", "Install" option.
3. Click OK at Welcome to IN-Skins Admin installation program.
4. Follow wizard to complete installation.
5. When finished select "Exit", remove CD and restart computer.
Starting the In-Skins Admin Program
1. Always make sure the voicemail is working by dialing a voicemail port (150-157) before connecting
computer to the system.
2. The file to open “Admin”, program can be found at: Start > Programs > In-Skins Admin or Icon on
desktop.
3. Each time you open this program, the "Connection Wizard" will display these connection options:
•
Direct via RS232
•
Remote System via Modem Call
•
Offline - Local Direct
4. The Hard Drive voicemail system can be administered locally, or remotely, or you can work offline to
add multiple names.
Local STSe Site
1. When connecting onsite use a straight through serial cable. A female to female gender changer is
required also.
2. Make sure the voicemail system is operating by dialing into the voicemail before connecting.
3. Start the Admin program.
4. At the "Welcome" window, select "Direct via RS232 Cable" and click “NEXT”.
5. Type in a new name, or select a name from the dropdown list, and click “NEXT”.
6. Select the COM Port for your system (normally COM port 1).
7. Make sure baud rate: is 115200 baud.
8. Enter mailbox number: 100.
9. Enter password: 0000
10. Click next and wait for program to load. This can take several minutes.