Vodavi Starplus STSe, Quick Start Manual

Page: 14 / 72

STSe Quick Start Guide September 2005
- 10 -
VO D AVI
FLASH VOICEMAIL PROGRAMMING (cont’d)
13. Select Open & Close Schedule (item # 1).
a. If Open Close time is correct, press ESC .
b. If time needs to be changed, arrow to “Time” and press F4 . Enter new time in military format. First
Open, then Close. When finished press ESC .
14. Select Number Plan (item # 2)
NOTE
: The CCR menu number at the top of the CCR Menu (1). Max of five (5) Menus F1 and F2 keys
to move from one menu to another. “Y” next to first digit permission key is enabled. “N” key is
disabled.
CCR Menu 1
a. Digit 1 should be “Y”
b. Digit 2, 3, 5, 6,7, 8, and 9 should be “N”
c. Digit 4 should be “Y”
d. Digit 0 should be “Y” and extension ( 0)
e. Digit * and # should be “Y”
f. Press F1 for CCR Menu 2
CCR Menu 2
g. Digit 1 should be “Y”
h. Digit 2, 3, 5, 6,7, 8, and 9 should be “N”
i. Digit 4 should be “Y”
j. Digit 0 should be “Y” and Extension 120
k. Digit * and # should be “Y”
l. When finished press ESC .
15. Select Mailbox Assignments (item # 9)
a. Arrow to Name & Name Mode.
b. Enter the First then Last name of each user. Capitalize only the first letter of each name.
c. To change Mode from Last name to First name, Arrow up to where cursor is under the “L” in Last.
Press “F”, then press
ENTER . Last will change to “First.
d. Arrow down to Mailbox 120.
e. Arrow right to “Direct Xfer” column.
f. The cursor is under the “O” in OFF.
g. Press “1”, then press ENTER . OFF changes to “ON”.
NOTE
: “ON” sends calls to mailbox, “OFF” sends calls to stations.
h. Press ESC .
16. Type “Exit” from the Main Menu and press ENTER .
--- The voicemail system is now programmed. ---