Vodavi Starplus STSe, Quick Start Manual

Page: 23 / 72

STSe Quick Start Guide September 2005
- 19 -
VO D AVI
COMMON PROGRAMMING ITEMS
(References to Programming: See Programming Manual, Section F. Refer to list of Flash Codes and Flexible
Buttons, or Feature Codes for page number reference.)
1. Admin Access
(To accomplish Flash programming from any telephone. By default Station 100).
At Station 100:
Dial * * 3226
FLASH 50
Enter station range to be programmed (display shows Page “A”)
Press Flexible Button 18, “Admin Access”.
Press 1, HOLD.
2. Attendant Display Timer
Time Display screen holds an item before it changes to the next screen. Example : Line 1 ringing; call
answered, it changes to say Line 1. Changing this to a longer timer allows the operator to recognize the
CO line she is on before the display changes to another screen.
* * 3226
FLASH 02, Button 2
(Default is 1 sec. Suggested time is 5 sec.)
3. Group Listening
Press ON/OFF while off hook. This turns on the speaker and turns off the microphone, so other people in
the area can monitor the conversation. They can only listen, thus the term, “Group Listening".
* * 3226
FLASH 05, Button 9
(Default is disabled. Enter 1 to enable)
4. Attendant Station Assignment
Default is station 100 for group 0. (See Tenant Sharing, Attendant programming below.)
5. Tenant Sharing
Tenant Sharing allows for up to 10 tenants, groups, companies, and etc. (0-9). Each group can have its
own operator, up to 6 in each group. By default, Group 0 has operator assigned to (Station 100).
•
Stations are assigned to groups (0-9). All stations are assigned to Group 0 by default.
•
CO Lines can be assigned to groups. By default, all CO Lines are assigned to Group 0.
When CO lines are assigned to different groups, dialing 9 will access the last CO Line in your group.
A station can press 0 and go to the operator in their group.